Table of Contents

Advertisement

∫ Single setting
1 Press 2/1 to select the picture
and then press 4 to SET/
CANCEL.
A
[SET]
[CANCEL]
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
"[DPOF PRINT]". (P103 to 104)
• If you press [MENU/SET] while canceling
protection, the canceling will stop halfway.
• The protect setting may not be effective
on other equipment.
• If you want to delete protected pictures,
cancel their protection.
• Even if you protect pictures in the built-in
memory or a card, they will be deleted if
the built-in memory or the card is
formatted.
• Even if you do not protect pictures on an
SD Memory Card or an SDHC Memory
Card, they cannot be deleted when the
card's Write-Protect switch B is set to
[LOCK].
• The following functions cannot be used
with protected pictures.
– [ROTATE]
Downloaded from
www.Manualslib.com
The protect icon [
appears.
The protect icon [
disappears.
2
manuals search engine

– [AUDIO DUB.]

– [TITLE EDIT]
[AUDIO DUB.]
Adding audio after taking pictures
MENU
Press [
] to display the [PLAY] mode
SET
menu and select the item to set. (P93)
You can add the audio after taking a
picture.
1 Press 2/1 to select the picture
and then press 4 to start audio
recording.
] A
] A
• The message [OVERWRITE AUDIO
DATA?] screen appears when audio has
already been recorded. Press 3 to
select [YES] and then press [MENU/
SET] to start audio recording. (The
original audio is overwritten.)
• Audio dubbing cannot be used with the
following pictures.
– Motion pictures
– Protected pictures
– Pictures recorded when the quality is
set to [RAW] or [RAWiJPEG]
2 Press 4 to stop recording.
• The audio recording stops
automatically if 4 is not pressed after
about 10 seconds.
3 Press [MENU/SET] twice to close
the menu.
Advanced (Playback)
105
VQT1F83

Advertisement

Table of Contents
loading

Table of Contents