Panasonic DMC-FZ18 Operating Instructions Manual page 101

3 Press /// to move the
cursor to [EXIT] and then press
[MENU/SET] to end text input.
4 Press [MENU/SET] twice to close
the menu.
• You can also use the joystick to perform
1 4
steps to .
w Multi setting
1 Press / to select the picture
and then press  to SET/
CANCEL.
The [TITLE EDIT] icon
[SET]
appears.
The [TITLE EDIT] icon
[CANCEL]
disappears.
• Repeat this step.
• Titles cannot be changed or deleted in
[MULTI].
2 Press [MENU/SET].
• After performing step
2
step onwards in "Single setting"
(P100).
w Delete the title (for [SINGLE] only)
2
In step when [SINGLE] (P100) is
selected, delete all the texts, select
[EXIT], and press [MENU/SET].
Press [MENU/SET] twice to close the
menu.
2
, perform
Example of text entry
In case of entering [LUMIX]:
Press /// to move the cursor
to [L] and then press [MENU/SET].
Press /// to move the cursor
to [U] and then press [MENU/SET].
Press /// to move the cursor
to [M] and then press [MENU/SET].
Press /// to move the cursor
to [I] and then press [MENU/SET].
Press /// to move the cursor
to [X] and then press [MENU/SET].
• Registered text can be displayed on the
screen of this unit.
• Text can be scrolled if all of the registered
text does not fit on the screen.
• [BABY1]/[BABY2] (P61) or [PET] (P62)
name settings in scene mode can also be
registered by using the operation in steps
2 3
and when [SINGLE] (P100) is
selected.
• The name setting of [BABY1]/[BABY2]
(P61) or [PET] (P62) in scene mode and
[TITLE EDIT] cannot be registered at the
same time.
• You can use the software
[PHOTOfunSTUDIO-viewer-] on the
CD-ROM (supplied) to print the text
(comments). [For details, refer to the
operating instructions (PDF file) of the
software.]
• You can set up to 50 pictures at one time
with [MULTI].
• You cannot use title edit for the following
pictures.
– Pictures recorded when the quality is set
to [RAW] or [RAWKJPEG]
– Pictures recorded with other equipment
– Motion pictures
– Protected pictures
Advanced (Playback)
101
VQT1G06