Advanced (Playback)
3
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
•
Repeat these steps for each picture.
•
The settings are canceled when [MENU/
SET] is pressed again.
4
Press [‚] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
∫ Canceling all the [PROTECT] settings
1
Select [CANCEL] on the screen shown in step
2
Press 3 to select [YES] and then press [MENU/SET].
3
Press [MENU/SET] to close the menu.
•
If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
Note
•
The protect setting may not be effective on other equipment.
•
Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
•
Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they
cannot be deleted when the card's Write-Protect switch is set to [LOCK].
You can add the audio after taking a picture.
1
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P18)
2
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
•
The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
•
Audio is recorded from the built-in microphone on the camera.
•
If you press [‚], the audio dubbing is canceled.
3
Press [MENU/SET] to stop recording.
•
It will automatically stop after recording about 10 seconds without
pressing [MENU/SET].
4
Press [‚] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
Note
•
Audio dubbing may not work properly on pictures recorded by other equipment.
86
VQT1R87
Downloaded From camera-usermanual.com Panasonic Manuals
[SINGLE]
Press 2/1 to
select the picture.
2
B [AUDIO DUB.]
Press 3/4/2/1
to select the
pictures.
and then press [MENU/SET].
[MULTI]