White Bal - Samsung SCC-C4253P User Manual

setup
If <BACKLIGHT> is set to <BLC>, the MASK AREA function is not available.
EXT : The interface to an external alarm enables an automatic switch between

DAY and NIGHT mode.
M
If you use an infrared light source while in AUTO mode, this may cause a failure in
AUTO SWITCH or AUTO FOCUS.

WhITe bAl

If you need to adjust the color according to the ambient illumination, you can use the
<WHITE BAL> function.
Illumination is generally referred to as color temperature, which is represented in a
measurement of kelvin (K). Color temperatures for ordinary lighting are as follows:
In the <WHITE BAL> menu, you can
set a mode for correcting the <WHITE
BAL>.
- ATW1,2 : If you set the <WHITE
BAL> menu to <ATW1> or
<ATW2> mode, this will monitor
the change of the color temperature
to correct the <WHITE BAL> as
needed.
The following color temperature
ranges are assured in individual
modes:
ATW1 : 2500K ~ 9300K (  1)
ATW2 : 2000K ~ 10000K
(suitable to sodium light source) (  2)
 1 : With <ATW1> mode active in a color temperature environment ranging
beyond between 2500K and 9300K, a proper white balance value may not be
produced; if this is the case, you are recommended to use <ATW2> mode.
 2 : With <ATW2> mode active in a mostly single color environment, the display
color and the actual one may differ; so select a mode as appropriate to your
color temperature environment.
_ setup
10000K
Blue sky
Rainy
9000K
8000K
7000K
Cloudy
6000K
5000K
Sunny
4000K
3000K
Halogen lamp
2000K
Candlelight
1000K
Partly Cloudy
Fluorescent lamp
Tungsten lamp