Samsung SCC-C4253P User Manual page 13

4. Determine the type of power supply and set the POWER SELECTION switch
accordingly. Next, plug the power adapter into a wall outlet.
5. If the camera operates normally, the following screen will be displayed for
5 seconds and then disappears.
6. The requirements for RS485 control is as follows :
- Signaling Speed: 9600 bps
- Data Bit : 8 bits
- Stop Bit : 1 bit
- Parity Bit : none
TYPE 4_ZOM_WDR_P
PROTOCOL
ADDRESS
COMM.TYPE
BAUD RATE
CAMERA VER.
LENS
SAMSUNG
0
RS485,HALF
9600
V1.00_090817
OK
English _1