Samsung SCC-C4253P User Manual page 21

setup
dAy/NIGhT
You can specify a recording mode according
to the scene.
1. Select <CAMERA SET> - <DAY/NIGHT>.
2. Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of

the scene.
NIGHT : Fixed to NIGHT mode,

regardless of the scene.
If BURST is set to <ON>, the burst signal will be output along with the black-
and-white composite video signal.
AUTO : According to the luminance, this

will switch DAY to NIGHT mode, or vice
versa.
- BURST : If set to <OFF>, the burst signal
will not be output in NIGHT mode.
- DAY  NIGHT
Specify the brightness level switch-
ing from
Adjusting from HIGH to LOW will cause
to switch the filter in a darker screen.
- DAY  NIGHT DWELL TIME : Time re-
quired to determine the filter switch.
- NIGHT  DAY BRIGHTNESS : Specify the brightness level switching from
BW to COLOR filter. Adjusting from HIGH to LOW will cause to switch the
filter in a darker screen.
- NIGHT  DAY DWELL TIME : Time required to determine the filter switch.
- MASK AREA : If there exists a bright spot
light source in a night scene, you can
specify the size and position as needed.
This will prevent an error in switch-
ing filter, or failure to determine the
filter switch in a night scene where
a bright spot light source exists.
Any excessively bright area in a night
scene will be MASKed.
You can specify MASK 1 and 2 simultaneously.
BRIGHTNESS
COLOR to BW
DAY/NIGHT
WHITE BAL
FOCUS MODE
ZOOM SPEED
DISPLAY ZOOM
DIGITAL ZOOM
DETAIL
V-SYNC
AGC COLOR SUP
BURST
DAY NIGHT

BRIGHTNESS
DWELL TIME
NIGHT DAY
:

BRIGHTNESS
DWELL TIME
filter.
MASK AREA
MASK AREA
<SIZE>
<LOCATION>
AUTO
ONEAF
[ 2 ]
OFF
OFF
[ 2 ]
(INT)---
MID
AUTO
OFF
MID
2SEC
MID
5SEC
1 2
English _1