20
STORAGE
20.2
Preparing for use after storage
–
Lift the motorcycle with the front lifting gear. (
–
Cover the motorcycle with a porous sheet or blanket.
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and exhaust system to rust.
–
Take the motorcycle from the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear. (
–
Recharge the battery.
–
Install the battery.
–
Set the time and date. (
–
Perform checks and vehicle care when preparing for use. (
–
Take a test ride.
401059-01
(
p. 120)
(
p. 119)
p. 54)
p. 80)
p. 81)
p. 79)
p. 61)
158