Wheels, Tires; Removing The Front Wheel - KTM 2016 690 DUKE Owner's Manual

14

WHEELS, TIRES

14.1

Removing the front wheel

Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
Remove screw
–
Remove screws
–
Press back the brake linings with a light lateral tilting of the brake caliper on the brake
disc. Pull the brake caliper carefully back from the brake disc and hang it to one side.
Info
Do not pull the hand brake lever while the brake caliper is removed.
602545-10
–
Loosen screw
–
Loosen screws
–
Press on screw
–
Remove screw
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
–
602546-10
–
Hold the front wheel and remove the wheel spindle. Take the front wheel out of the
fork.

and pull wheel speed sensor
 and spacers  .

by several rotations.

.
 to push the wheel spindle out of the axle clamp.

.
Always lay the wheel down in such a way that the brake discs are not dam-
aged.
p. 79)
p. 80)

out of the hole.
105