14
WHEELS, TIRES
14.5
Checking the rear hub rubber dampers
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They eventually wear out during
operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub become damaged.
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Remove the rear wheel.
Main work
–
Check bearing
»
If the bearing is damaged or worn:
–
Change the bearing of the rear sprocket carrier.
–
Check rubber dampers
»
If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
602568-10
–
Lay the rear wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check play
hand.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
602569-11
(
p. 108)
.
of the rear hub for damage and wear.
, hold the rear wheel tight and try to turn the rear sprocket with your
p. 79)
≤ 5 mm (≤ 0.2 in)
113