Table of Contents
Advertisement
13.
Slide and pull the right bottom-panel away from the chassis.
1 right bottom-panel
Replacing the Right Side-Panel(s)
1.
Follow the instructions in "Before You Begin" on page
2.
Align the right bottom-panel to the bottom of the computer and slide it into
position.
3.
Slide the lighting-board into position and replace the two screws that
secure the lighting board to the chassis.
4.
Connect the lighting-board cable to the connector on the master I/O board.
5.
Slide the right top-panel into position.
6.
Replace the three screws that secure the right side-panel(s) to the chassis.
7.
Replace the power-supply cover (see "Replacing the Power Supply Cover" on
page 59).
8.
Replace the hard-drive fan assembly (see "Replacing the Hard-Drive Fan
1
Assembly" on page 43).
9.
Replace the drive-bay shroud (see "Replacing the Drive-Bay Shroud" on
page 19).
10.
Close the PCI shroud (see "Closing the PCI Shroud" on page
11.
Replace the left side-panel (see "Replacing the Left Side-Panel" on page
12.
Connect your computer and devices to electrical outlets and then turn
them on.
CHAPTER 16: RIGHT SIDE-PANEL(S)
6.
18).
11).
081
/
081
Advertisement
Table of Contents
