Replacing the Right AlienFX Side-Panel Connector
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before Working Inside Your
Working Inside Your
regulatory_compliance.
Procedure
1. Replace the screws that secure the right AlienFX side-panel connector to the bracket.
2. Replace the screws that secure the right AlienFX side-panel connector to the chassis.
3. Connect the cable that connects the right AlienFX side-panel connector to the I/O board. See
Post-requisites
1. Replace both the left and right side-panels. See
2. Replace the
stability
foot.
34
Computer. After working inside your computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/
"Replacing the Side
Panels".
After
"I/O Board
Components".