Table of Contents
Advertisement
Removing the Processor
1.
Follow the instructions in "Before You Begin" on page
2.
Remove the left side-panel (see "Removing the Left Side-Panel" on page
WARNING: Despite having a plastic shield, the processor liquid-cooling
assembly may be very hot during normal operation. Ensure that it has
had sufficient time to cool before you touch it.
3.
Remove the processor liquid-cooling assembly (see "Removing the
Processor Liquid-Cooling Assembly" on page 48).
4.
Press and push the release lever down and out and release it from the tab
that secures it.
CAUTION: When removing the processor, do not touch any of the pins
inside the socket or allow any objects to fall on the pins in the socket.
5.
Open the processor cover and gently lift the processor to remove it from the
socket.
6.
Leave the release lever extended in the release position so that the socket is
ready for the new processor.
6.
11).
5
1 processor cover
3 socket
5 tab
CHAPTER 10: PROCESSOR
1
2
3
4
2
processor
4
release lever
052
/
052
Advertisement
Table of Contents
