Table of Contents
Advertisement
Replacing the Optical Drive(s)
1.
Follow the instructions in "Before You Begin" on page
2.
Remove the new optical drive from its packaging. Save the original
packaging for storing or shipping the optical drive.
3.
Remove the optical-drive bay filler (if applicable).
4.
Lift the securing tab and slide the optical drive through the front of the
computer until the securing tabs snap into place.
5.
Connect the power and data cables to the optical drive (if applicable).
6.
Close the PCI shroud (see "Closing the PCI Shroud" on page
7.
Replace the left side-panel (see "Replacing the Left Side-Panel" on page
8.
Lift the drive panel towards the top of your computer.
9.
Connect your computer and devices to electrical outlets and then turn
them on.
6.
18).
11).
CHAPTER 5: DRIVE(S)
026
/
026
Advertisement
Table of Contents
