Table of Contents
Advertisement
Advance DRAM Configuration Submenu
Memory-Z
Advanced Memory Settings
tCL
tRCD
tRP
tRAS
tRFC
tWR
tWTR
Opens submenu to display the SPD
configuration for each memory
module.
Allows you to toggle to Manual mode
and set all of the timing parameters.
Displays the Column Address Strobe
Latency (editable in Manual Mode).
Displays timing of RAS to CAS delay
(editable in Manual Mode).
Displays timing of RAS Precharge
(editable in Manual Mode).
Displays timing of Row Address
Strobe (editable in Manual Mode).
Displays timing of Refresh to Archive/
Refresh cycle time (editable in Manual
Mode).
Displays timing of Write Recover
(editable in Manual Mode).
Displays Write to Read Delay (editable
in Manual Mode).
Advance DRAM Configuration Submenu
tRRD
tRTP
1T/2T Timing
Overclock Configuration Submenu
Adjust CPU BClk (MHz)
Spread Spectrum
Adjust PCI Frequency (MHz)
Adjust PCI-E Frequency (MHz) Adjust PCI-E Frequency.
Intel® TurboMode tech
[1-4] Core CPU Turbo Ratio
Limit
CHAPTER 22: SYSTEM SETUP
Displays RAS to RAS delay (editable in
Manual Mode).
Displays Read to Precharge Command
Delay (editable in Manual Mode).
Displays the Command Rate (editable
in Manual Mode).
Adjust BClk of processor.
Enable/Disable Spread Spectrum
Modulation.
Adjust PCI Frequency.
If enabled, allows the processor to run
at faster frequencies than marked.
Limit ratio for cores 1-4
(XE processors only).
0111
/
0111
Advertisement
Table of Contents
