Installing Flash Support Files For Fps-10 - Nokia RX-44 Service Manual

15. To use the selected connection, connect the phone to Phoenix with correct service tools, make sure that
it is switched on and select Scan Product.
When a product is found, Phoenix will load product support. Name of the loaded product support module
and its version information will be shown on the bottom of the screen.

Installing flash support files for FPS-10

Prerequisites
Note: You need to install flash support files for FPS-10 only, if you don't have the latest Phoenix
available or the flash support files have changed after the latest Phoenix release.
• Flash support files are installed automatically, when you install Phoenix. Use Phoenix packages later than
September 2007.
• Normally it is enough to install Phoenix and the phone-specific data package because the Phoenix
installation always includes the latest flash update package files for FPS-10.
• A separate installation package for flash support files is available, and the files can be updated according
to this instruction, if updates appear between new Phoenix / data package releases
Context
If you are NOT using a separate flash update package, you can skip this section and continue with updating
FPS-10 flash prommer software after installing a new phone data package.
Page 3 –20 COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Service Software Instructions
RX-44
Issue 1