Gps Radiated Cw Test; Gps Settings For Phoenix; Gps Control - Nokia RX-44 Service Manual

RX-44
BB Troubleshooting and Manual Tuning Guide

GPS radiated CW test

The meaning of the test is to confirm that GPS antenna is working properly and antenna connection to the
test pad is good enough.
The coupler position A4 in SA-131:
Figure 22 Test set-up
Coupler attenuation is about 20 dB at GPS frequency.

GPS settings for Phoenix; GPS control

Context
Use the following to test GPS using Phoenix.
Steps
1. Start Phoenix service software.
2. From the File menu, select Scan Product and check that the correct product version is displayed.
3. From the Testing menu, select GPS Control. This opens up GPS Control dialogue box, as shown in the figure
below, and enables the GPS.
Issue 1 COMPANY CONFIDENTIAL Page 4 –31
Copyright © 2007 Nokia. All rights reserved.