Nokia RX-44 Service Manual page 66

You can also install a memory card to internal compact flash slot inside FPS-10. See instructions in the
FPS-10 User Guide. If you use internal compact flash, then you don't need PCMCIA Compact Flash adapter.
Compact Flash is also available as service device spare part code 0780232, type MEMORY CARD CF 2G FOR
FPS-10.
8. A memory card has to be formatted before use. Press FPS10 Conf button in Prommer Maintenance dialog.
9. Check PCCard Compact Flash checkbox in Media Formatting and press OK.
10. After successful formatting, Phoenix will inform "Media preparation finished 100%". If the formatting
is not successful, check that the PC Card is properly installed, reboot the FPS-10 and reformat it.
Page 3 –26 COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Service Software Instructions
RX-44
Issue 1