Transmit Power - D-Link DIR-320NRU User Manual

DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Parameter
Base station ID

Transmit power

Frequency
Connect
Disconnect
To save the values of the SSID and Diode on modem field, click the Connect button.
The identifier of the base station.
The signal level at the output of the modem's receiver.
The frequency of the signal transmitted by the modem's receiver.
Click the button to connect to the WiMAX network. Beforehand,
you need to create a WAN connection with relevant parameters (see
the Creating WiMAX WAN Connection section, page 30).
The button is displayed when the connection is not established.
Click the button to disconnect from the WiMAX network.
The button is displayed when the connection is established or is
being established.
Page 94 of 108
Configuring via Web-based Interface
Description