Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
On the Static DHCP tab, you can specify MAC address and IP address pairs. The tab is active
when the router's DHCP server is enabled.
To create a MAC-IP pair (set a fixed IP address in the local area network for a device with a certain
MAC address), click the Add button.
You can specify the following parameters:
Parameter
IP address
MAC address
Host name
Click the Save button.
Existing MAC-IP pairs are displayed on the Static DHCP tab. To remove a pair, select the
relevant line in the table and click the Remove button. Then click the Save button.
Figure 20. The tab for configuring MAC-IP pairs.
An IP address which will be assigned to the device with the
specified MAC address.
The MAC address of the device from the LAN.
A network name of the device for easier identification. Optional.
Page 29 of 108
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
