Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
You can specify the following parameters:
Parameter
Destination network A destination network to which this route is assigned.
Destination netmask The destination network mask.
Gateway
Metric
Via Interface
Click the Change button.
To edit an existing route, click the relevant route link. On the opened page, change the needed
parameters and click the Change button.
To remove an existing route, click the relevant route link. On the opened page, click the Delete
button.
Figure 53. The page for adding a static route.
An IP address through which the destination network can be accessed.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface through which the destination network can be
accessed from the drop-down list. If you have selected the <Auto>
value of this drop-down list, the router itself sets the interface on the
basis of data on connected networks.
Page 78 of 108
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
