Advanced Wireless Settings; Transmit Power; Mode - D-Link DIR-655 User Manual

Section  - Configuration

Transmit Power:

Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
RTS Threshold:
This value should remain at its default setting of
2432. If inconsistent data flow is a problem, only
a minor modification should be made.
Fragmentation
The fragmentation threshold, which is specified
Threshold: in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
DTIM Interval:
(Delivery Traffic Indication Message) 3 is the
default setting. A DTIM is a countdown informing
clients of the next window for listening to
broadcast and multicast messages.
802.11d: This enables 802.11d opration. 802.11d is a wireless specification developed to allow implementation of wireless networks in
countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Function:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless
clients.
Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may
create higher data loss.
D-Link DIR-655 User Manual

Advanced Wireless Settings

Transmit Power
802.11d Mode
5