Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Creating WiMAX WAN Connection
You can create a connection of this type only when a WiMAX USB modem is connected to the
router. Select the WAN connection on the Net / Connections page. On the opened page, select
the USB-WIMAX value from the Physical interface drop-down list and specify the needed
values.
Figure 21. The page for creating a new connection. The General settings and Physical layer sections.
Parameter
Name
Connection Type
Enable
Direction
MTU
MAC
General settings
A name for connection for easier identification.
Select the IPoE value.
Select the checkbox to enable the connection.
The direction of this connection.
Physical layer
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. By default, the MAC
address of your WiMAX USB modem is specified in the field.
Page 30 of 108
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
