DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
1. Select the PBC method in the software of the wireless device that you want to connect to the
router's WLAN.
2. Click the relevant button in the software or on the cover of the wireless device that you want
to connect to the WLAN.
3. Click the WPS button on the right side panel of the router.
After clicking the button the WPS LED blinks green. If the wireless device has been successfully
connected to the WLAN, the LED stops blinking and lights green for several minutes.
WDS
On the Wi-Fi / WDS page, you can enable the WDS function and select a mode of this function.
The WDS function allows joining local area networks together via a wireless connection of access
points.
Figure 42. The page for configuring the WDS function.
Page 62 of 108
Configuring via Web-based Interface