Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
The following fields are available on the page:
Parameter
WDS Mode
WDS Phy Mode
WDS Encryption
Encryption Key
WDS MAC(1-4)
The WDS function parameters specified on the page must be the same for all
!
interconnected devices. In addition, it is required to set the same channel (on the Wi-Fi /
Basic settings page).
When you have configured the parameters, click the Change button.
The WDS function mode.
Disable: The function is disabled.
Bridge mode: Access points communicate to each other only,
wireless devices cannot connect to them.
Repeater mode: Access points communicate to each other,
wireless clients can connect to the WLAN created by interconnected
access points.
A physical mode of data transfer between access points
interconnected via the WDS function.
CCK: 802.11b devices only.
OFDM: 802.11g devices only.
HTMIX: 802.11g and 802.11n devices.
GREENFIELD: 802.11n devices only.
A type of encryption for data transfer between access points
interconnected via the WDS function.
NONE: No encryption.
WEP.
TKIP.
AES.
A key for the specified type of encryption. If the NONE value is
selected from the WDS Encryption drop-down list, the field is not
displayed.
The MAC addresses of devices connected to the router via the WDS
function.
Page 63 of 108
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
