10. Remove the FFC (flexible flat cable) from
the connector of CIS.
11. Remove the connector from the DP inverter
PWB.
12. Remove the ground screw and then remove
the ground wire.
13. Remove three screws and then remove the
CIS.
14. Remove the screw and then remove the CIS
guide from CIS.
15. Replace the CIS and Install the CIS to the
DP.
Caution
Be sure to refit the ground wire that has
been removed in step 12.
16. Refit all the removed parts.
DP inverter PWB
Ground wire
FFC
Connector
Figure 1-5-15
CIS
Figure 1-5-16
3LL/3LK
Ground screw
Connector
Screws
CIS
Screw
CIS guide
Screw
1-5-9