On/Off Switch - Panasonic MC-UL424-00 Service Manual

MC-UL424-00 / MC-UL426-00
3.3.

On/Off Switch

3.3.1. Removal
1. Remove lower plate (See Lower Plate - Removal).
2. Remove agitator and belt (See Agitator - Removal).
3. Remove motor cover (See Motor - Removal).
4. Remove nozzle (See Motor - Removal).
5. Remove motor assembly (See Motor - Removal).
6. Lift power distribution board out of dust container.
7. To remove button use the following steps simultaneously:
(A) Slide button inward
(B) Press rib outward
(C) Slightly depress on/off button
8. Remove spring.
9. Lift switch out of dust container.
10. Disconnect leads.
3.3.2. Installation
1. Connect leads to switch.
2. Place switch in slot with terminals towards the inside of dust
container.
3. Reinstall spring.
4. Reinstall button by:
(A) Placing bottom of button behind retaining ribs.
(B) Locate hinge tab in slot.
5. Press button into place.
6. Reinstall power distribution board in slots.
7. Reinstall motor (See Motor - Installation).
8. Reinstall nozzle (See Motor - Installation).
9. Reinstall agitator and belt (See Agitator - Installation).
10. Reinstall lower plate (See Lower Plate - Installation).
18