Vacuum Cleaner reference. MC-UL672 Model No. We would advise that you carefully study these Operating Instructions before attempting to operate the vacuum cleaner and that you note the Important Safety Instructions.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
Information on Disposal in other Countries outside the European Union be present. • This appliance should be serviced by an authorised Panasonic Service Centre, and only genuine Panasonic spare parts should be used. This symbol is only valid in the European Union.
• All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. Ensure handle alignment button is in alignment slot in front of Push down on handle until it locks into place at desired height.
SPECIFICATIONS B) HOW TO ATTACH THE HOSE MODEL NO. MC-UL672 POWER SOURCE 230-240V / 50Hz MAX. INPUT POWER 2000w MOTOR PROTECTION Hose connector DUST BIN CAPACITY 1.8 litres EXHAUST FILTER HEPA Hose Inlet Hose Coupling DIMENSIONS (W x L x H)
F) HANDLE LOCK / RELEASE BY FOOT PEDAL MAINS LEAD Step a second time IMPORTANT: If the mains lead becomes damaged, it must be repaired by Panasonic, authorised service centre or a CAUTION: To prevent qualified person in order to avoid any hazard.
H) BLOCKAGES G) HOW TO USE THE ACCESSORIES The hose located on the vacuum cleaner carries the dirt from the nozzle up to the dust bin. If the hose should Secondary Filter Screen become clogged: Unplug the vacuum cleaner from mains outlet. Remove hose coupling and check hose coupling and hose Suction Inlet inlet for clogs according to the following procedure.
MAINTENANCE AND SERVICING TO REPLACE BELT Motor Always follow all safety precautions when cleaning and servicing the vacuum cleaner. Seat left end of agitator into nozzle base. To seat agitator Shaft end, place rounded portion of agitator end cap down into slot Belt WARNING: Electrical Shock And Personal Injury Hazard Pulley...
G) BELT CHANGING AND CLEANING C) DUST BIN CLEANING AND REMOVAL Always empty the dust bin when dirt level reaches the “MAX FILL” line. WARNING: Electrical Shock And Personal Injury Hazard CAUTION: Electrical Shock And Personal Injury Hazard Disconnect from electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
TO ASSEMBLE THE DUST BIN D) DUST BIN FILTER CHANGING AND CLEANING Locking Tabs Check primary filter frequently and clean when dirty. Remove the dust bin assembly as outlined in the DUST BIN CLEANING section and empty contents of dust bin. Rotate upper dust bin clockwise from the locked position to Separate the upper dust bin from the lower dust bin by lifting Align the filter with the locking tabs in the dust bin and push...