WLAN module
Description
WLAN module, 11AC INT 3165 M.2 MOW
WLAN assembly, RT 11BGN+BT4 1x1 SANJI2 CB
IMPORTANT:
and replacement.
Before removing the WLAN module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
components:
a.
Battery (see
b.
Optical drive (see
c.
Hard drive (see
d.
Solid-state drive (see
e.
Memory (see
Remove the WLAN module:
1.
Carefully disconnect 2 antenna cables (1).
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
Optical drive (select products only) on page
Hard drive on page
SSD (M.2) on page
Memory on page
28), and then remove the following
30).
31).
33).
34).
Spare part number
806723-005
855106-855
26).
Component replacement procedures
37