Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures; Optical Drive (Select Products Only) - HP Pavilion Maintenance And Service Manual

5 Removal and replacement procedures for
Customer Self-Repair parts
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
NOTE: The Customer Self-Repair program is not available in all locations. Installing a part not supported by
the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.

Component replacement procedures

NOTE: Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See
details.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
One screw must be removed, replaced, and/or loosened when servicing Customer Self-Repair parts. Make
special note of each screw size and location during removal and replacement.

Optical drive (select products only)

Description
Optical drive, SATA DVDSM 9.0mm tray
Bezel, optical drive
In Natural Silver finish
In Onyx Black finish
In Modern Gold finish
In Cardinal Red finish
In Sport Purple finish
In Dragonfly Blue finish
In Blizzard White finish
IMPORTANT:
and replacement.
Before removing the optical drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
26 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Make special note of each screw and screw lock size and location during removal
Locating system information on page 13 for
Spare part number
803929-004
856339-001
856340-001
856341-001
856342-001
856343-001
856344-001
856345-001