Network - Samsung ProXpress M4030ND User Manual

Network

Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 26).
To change the menu options:
• Press (Menu) > Network on the control panel.
You can also use this feature from the SyncThru™ Web Service. Open the
Web browser from your networked computer and type the IP address of
your machine. When SyncThru™ Web Service
Network Settings (see "Using SyncThru™ Web Service" on page 213).
Option
Selects the appropriate protocol and configure parameters
to use the network environment (see "Setting IP address" on
page 131).
TCP/IP (IPv4)
There are lots of parameters to be set. If you are not
sure, leave as is, or consult the network
administrator.
Selects this option to use the network environment through
TCP/IP (IPv6)
IPv6 (see "IPv6 configuration" on page 141).
opens, click Settings >
Description
Option
Configure the ethernet port and network transmission
speed.
Ethernet
Turn the power off and on after you change this
option.
You can select the user authentication for network
802.1x communication. For detailed information consult the
network administrator.
Select this option to use the wireless network (see "Wireless
a
Wi-Fi
network setup(Optional)" on page 143).
You can activate or deactivate the protocols.
Protocol
Turn the power off and on after you change this
Management
option.
This list shows information on your machine's network
Network
connection and configuration (see "Printing a network
Configuration
configuration report" on page 131).
Reverts the network settings to the default values.
Clear Settings
Turn the power off and on.
a. This option is available when the optional Wireless/NFC kit installed.
Description
3. Useful Setting Menus
185