Samsung ProXpress M4030ND User Manual page 181

System Setup
Item
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• After 0 Sec: This option allows you to continue
printing when the paper size you have set is
mismatched with the paper in the tray.
Auto Continue
• After 30 Sec: If a paper mismatch occurs, an error
message will display. The machine waits for about
30 second, then automatically clear the message
and continue printing.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Determine whether or not the machine continues
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the
same size paper, the machine automatically prints from
tray 2 after the tray 1 runs out of paper.
Auto Tray Switch
Automatically substitutes the printer driver's paper size
to prevent the paper mismatch between Letter and A4.
Paper Substitution For example, if you have A4 paper in the tray but you
set the paper size to Letter in the printer driver, the
machine prints on A4 paper and vice versa.
Description
This option does not appear if you selected
Auto for Paper Source from printer driver.
Item
Decides to use or not use the Auto Tray Switch feature
Tray Protection for a certain tray. If you set tray 1 to on, for example,
then tray 1 is excluded during tray switching.
• Dynamic: If you open and close the tray when a
paper mismatch occurs, the paper settings (size and
type) for that tray automatically change to the
Tray Mode settings required for the job. (When you open and
close the tray in the Dynamic mode, the machine
presumes that the paper in the tray was replaced
with the size and type required for the job.)
The printer detects the printing data from computer
Skip Blank Pages whether a page is empty or not. You can set to print or
skip the blank page.
• CLR Empty Msg.
this option appears. You can clear the empty
message.
• Supplies Life: Allows you to check how many pages
are printed and how much toner is left in the
Maintenance
cartridge.
• RAM Disk
jobs.
• Paper Low Alert: Allows you to set the alarm for
when the paper is low.
Description
a
: When toner cartridge is empty,
b
: Enables/disables RAM disk to manage
3. Useful Setting Menus
181