Samsung ProXpress M4030ND User Manual page 95

Understanding display messages
Samsung does not recommend using a non-genuine Samsung toner cartridge such as refilled or remanufactured. Samsung cannot guarantee a non-genuine Samsung
toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine warranty.
9
Tray-related messages
Message
Output bin full
Paper Empty in MP
[tray type] Paper mismatch
[tray type] cassette Out
Error: [error number]
Tray Failure:[error number]. Check
[tray type] connection & turn off then
on. Call for service if the problem
persists
Error: [error number]
Tray Failure: [error number]. Pull [tray
type] out and insert it. Call for service
if the problem persists
Paper Low in [tray type]
Paper Empty in [tray type]
Meaning
The output tray is full.
There is no paper in the multi-purpose tray.
The paper size specified in the printer
properties does not match the paper you are
loading.
The tray is not securely latched
There is a problem in the tray.
There is a problem in the tray.
Running out of paper in the tray.
There is no paper in the tray.
Suggested solutions
Remove papers from the output tray, the machine resumes printing. If the
problem persists, call for service.
Load paper in the multi-purpose tray (see "Multi-purpose tray" on page 36).
You can select the option between Continue or Cancel. If you select Cancel
, the printing job will stop. Load the correct paper in the tray. If you select
Continue, printing job will continue.
Close the tray until it locks into place. If the problem persists, call for service.
Check the tray connection. If the problem persists, call for service.
Open and close the tray. If the problem persists, call for service
Load paper in the tray (see "Loading paper in the tray" on page 34).
Load paper in the tray (see "Loading paper in the tray" on page 34).
95
4. Troubleshooting