Olympus STYLUS-7010/-7010 Instruction Manual page 41

Refer to "Using the Menu" (p. 3) when adjusting the settings of these functions.
Selecting the video signal system to match your TV [VIDEO OUT]
E
SETUP VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV's video signal type.
Submenu 2
NTSC The camera is compatible with TVs in North America, Taiwan, Korea, Japan and others.
PAL The camera is compatible with TVs in Europe, China and others.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
●
Connection via AV cable
Open the connector cover
in the direction of the arrow.
STYLUS-7010/μ-7010
●
Connection via HDMI cable (STYLUS-7020/μ-7020 only)
Open the connector cover
in the direction of the arrow.
2 Use the camera to select the video signal format that matches that of the connected TV
([NTSC]/[PAL]).
3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)."
STYLUS-7020/μ-7020
Multi-connector
AV cable (supplied)
HDMI cable (commercially available)
Application
Multi-connector
Connect to the TV video
input jack (yellow) and
audio input jack (white).
HDMI mini
connector
Connect to the HDMI
connector on the TV.
EN 41