Shooting With Special Effects - Olympus STYLUS-7010/-7010 Instruction Manual

Refer to "Using the Menu" (p. 3) when adjusting the settings of these functions.
Taking pictures with
[COMBINE IN CAMERA 2]
1 Use mn to specify at which edge the next
picture is to be connected.
Direction for
combining the
next frame
2 Press the shutter button to take the fi rst
frame.
●
A guide frame appears as a reference.
CANCEL
MENU
1st frame
3 Compose the next shot so that the joint area
overlaps the guide frame.
4 Press the shutter button to take the next
shot.
To combine only two pictures, press the
E button before taking the third frame.
5 Repeat steps 3 and 4 to take a third
frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving
an image, press the m button.
CANCEL
MENU
Guide frame
Joint area
CANCEL
MENU
CANCEL SAVE
OK
MENU
Composition of the 2nd frame
Taking pictures with [COMBINE IN PC]
1 Use klmn to select the direction that
the frames are combined.
2 Press the shutter button to take the fi rst
frame, and then compose the second shot.
●
Compose the shot using the guide frame so that
the two adjacent frames overlap.
3 Repeat Step 2 until the number of required
frames are taken, and then press the
E button when done.
When the g mark is displayed, you cannot
continue shooting any further. Panorama
shooting is possible for up to 10 frames.
Refer to the OLYMPUS Master 2 help guide for
details on how to make panorama images.
Restoring the shooting functions to the
default settings [D RESET]
D
RESET
Submenu 1
Restores the following menu
functions to the default settings:
• Flash (p. 19)
• Exposure compensation (p. 20)
• Macro (p. 20)
• Self-timer (p. 21)
YES • [A IMAGE QUALITY] (p. 25)
• [G PANORAMA] (p. 30)
[J s] (p. 29)
•
• Shooting information display (p. 21)
• [Q MAGIC FILTER] (p. 31)
• Menu functions in [B CAMERA
MENU] (p. 26 to 28)
NO The current settings are not changed.

Shooting with special effects

[Q MAGIC FILTER]
Q MAGIC FILTER
1 Use klmn to select the desired effect,
and press the E button.
After selecting the desired effect by pressing
the E button, all functions except zoom cannot
be changed.
: h K s I A
Application
: K
EN 31