Network Time Server - Technicolor MediaAccess TG788VN Setup And User Manual

9 NETWORK SERVICES

9.4 Network Time Server

Introduction
A Network Time Server is a server that makes sure that the time settings of your device (your MediaAccess Gateway) are
in sync with the official time.
This time will be used for features like:
Access Control

For more information, see
Wireless Time Control

For more information, see
Call logs

Event logs

Requirements
Your MediaAccess Gateway must be connected to the Internet.
Specifying a time server for your MediaAccess Gateway
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see
2 On the Technicolor Gateway menu, click Configuration.
3 The System Configuration page appears. On the
4 Under Time Configuration, select Auto-configuration and configure the following settings:
88
"10.3 Access Control" on page
"10.4 Wireless Time Control" on page
"Accessing the MediaAccess Gateway GUI" on page
Navigation
99.
101.
33.
bar, click Configure.
DMS-CTC-20120510-0000 v1.0