8 NETWORK SERVICES
8.4 Network Time Server
Introduction
A Network Time Server is a server that makes sure that the time settings of your device (your MediaAccess Gateway) are
in sync with the official time.
This time will be used for features like:
Access Control
For more information, see
Wireless Time Control
For more information, see
Event logs
Requirements
Your MediaAccess Gateway must be connected to the Internet.
Specifying a time server for your MediaAccess Gateway
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see
2 On the Technicolor Gateway menu, click Configuration.
3 The System Configuration page appears. On the
4 Under Time Configuration, select Auto-configuration and configure the following settings:
Time Zone:
Select your time zone from this list.
76
"9.3 Access Control" on page
87.
"9.4 Wireless Time Control" on page
"Accessing the MediaAccess Gateway GUI" on page
Navigation
89.
33.
bar, click Configure.
DMS-CTC-20110713-0024 v1.0