Adding Rules For Address-Based Filtering - Technicolor MediaAccess TG788VN Setup And User Manual

10.1.2 Adding Rules for Address-Based Filtering

Introduction
Address-based filtering has a higher priority than content-based filtering. This means that when you are blocking a specific
category, you can still access a specific site if you allow it in the address-based filter.
Example
If you block content from the Finance / Investment category and allow access to netbanking.mybank.com,
netbanking.mybank.com will still be accessible.
Options
With the address-based filter you can:
Deny access to a specific web

Allow access to a specific web

Redirect a web site.

Redirect all web sites.

Deny access to a specific web site
Proceed as follows:
1 Browse to the MediaAccess Gateway
For more information, see
2 On the Toolbox menu, click Parental Control.
3 Make sure the Use Address-Based Filter check box is selected.
4 Type the URL of the Web site you want to block (for example "mail.provider.com") in the Web Site box.
5 In the Action list, click Block.
6 Click Add.
Allow access to a specific web site
Proceed as follows:
1 Browse to the MediaAccess Gateway
For more information, see
2 On the Toolbox menu, click Parental Control.
3 Make sure the Use Address-Based Filter check box is selected.
4 Type the URL of the Web site you want to allow (for example "netbanking.bank.com") in the Web Site box.
5 In the Action list, click Allow.
6 Click Add.
Redirect a web site
Proceed as follows:
1 Browse to the MediaAccess Gateway
For more information, see
2 On the Toolbox menu, click Parental Control.
3 Make sure the Use Address-Based Filter check box is selected.
4 Type the URL of the Web site you want to redirect (for example "cracks.am") in the Web Site box.
DMS-CTC-20120510-0000 v1.0
site.
site.
GUI.
"Accessing the MediaAccess Gateway GUI" on page
GUI.
"Accessing the MediaAccess Gateway GUI" on page
GUI.
"Accessing the MediaAccess Gateway GUI" on page
10 INTERNET SECURITY
33.
33.
33.
95