Figure 5-31 Add User Configuration Interface; Figure 5-32 Modifying User Interface - Honeywell Performance HED1PR3 Software Configuration Manual

78 | Performance Series IP Camera Software Configuration Guide
There are two types of default user:
•
•
The hidden user "default" is for internal system use only and cannot be deleted. When there is
no login user, this hidden user "default" is automatically used for logging in. You can configure
some rights for the hidden user, such as monitoring ability, so that the user can view channels
without logging in.
To add a user, in the Add User configuration interface, enter a user name and password, then
select a group. Ensure that the general user has lower rights than the admin user.
Modifying Users: Click
and rights.
www.honeywell.com/security
Figure 5-31 Add User Configuration Interface
admin
hidden user "default"
Note User rights cannot exceed the rights of the group to which that user belongs.
to modify a user's properties, including their group, passwords,
Figure 5-32 Modifying User Interface