Date And Time; Account Setup; Figure 5-29 Date And Time Configuration Interface; Table 5-20 Date And Time Configurations - Honeywell Performance HED1PR3 Software Configuration Manual

76 | Performance Series IP Camera Software Configuration Guide

Date and Time

Parameter
Date Format
Time Format
Time Zone
Current Time
Sync PC
DST
NTP
NTP Server
Port
Update Period

Account Setup

The system supports up to 15 characters for the user name or user group name. You can use
letters, numbers, and the underscore character ( _ ) for the user or group name.
You can configure up to 18 users and eight groups (default factory settings). The factory default
setup includes two user levels: user and admin (case-sensitive).
www.honeywell.com/security
Figure 5-29 Date and Time Configuration Interface
Table 5-20 Date and Time Configurations
Function
Select a date format from the drop-down list.
Select a time format, either 24-hour or 12-hour.
Select the time zone for the camera.
Set it to set the system's time. You have to Save to activate this time.
Click to sync the camera's time with your PC's time.
Set when Daylight Saving Time begins and ends. Select Date or Week.
Click to enable NTP.
Configure the NTP time server.
Configure the port for the NTP time server.
Configure synchronization periods between the camera and the time
server.