Figure 5-14 Ip Filter Configuration Interface - Honeywell Performance HED1PR3 Software Configuration Manual

64 | Performance Series IP Camera Software Configuration Guide
Before you can restrict access to the cameras through the IP filter, you must first configure the
Trusted Sites here.
CAUTION
the IP/MAC address that is allowed to access the camera, you will have to
return the camera to the factory to repair the problem.
www.honeywell.com/security
Figure 5-14 IP Filter Configuration Interface
Note Add these addresses before enabling Trusted Sites.
Note If you specify a MAC address limitation here, the computer with the specified
MAC address must be in the same network subnet as the IP camera.
If you setup the IP Filter/Trusted sites options and forget