Configuring System Settings; General System Setup; General; Figure 5-28 General System Configuration Interface - Honeywell Performance HED1PR3 Software Configuration Manual

Parameter
Disk Full
Record Mode
Record Stream

Configuring System Settings

General System Setup

The general interface includes the local host setup (including the camera name and GUI
language), and the date/time setup.

General

Parameter
Device Name
Language
Video Standard
Table 5-18 Record Control Configurations (cont'd)
Function
Select Stop Recording or Overwrite the previous files when the HDD
is full.
Overwrite: If the current working HDD is full, then the system will
overwrite the previous file.
Stop: If the current working HDD is full or is overwriting, the system will
stop recording.
Select Auto, Manual, or Off.
Select Main Stream or Sub Stream.
Figure 5-28 General System Configuration Interface
Table 5-19 General System Configurations
Function
Enter the camera's name.
Select a language from the drop-down list.
Select the video standard: NTSC or PAL.
Configuring Camera Settings | 75
800-21358 - A - 10/2015