Configuring Alarms; Figure 6-11 Illegal Access Configuration Interface; Figure 6-12 Alarm Configuration Interface - Honeywell Performance HED1PR3 Software Configuration Manual

92 | Performance Series IP Camera Software Configuration Guide
1.
2.
3.

Configuring Alarms

Click the Alarm tab to open the alarm configuration interface.
www.honeywell.com/security
Figure 6-11 Illegal Access Configuration Interface
Click Enable so that an alarm is triggered when someone tries to illegally access the
camera.
Enter the number of times a user can attempt to log in. Select from 3 to 10.
Click Email so that an email is sent to a specified receiver if someone attempts to illegally
access the camera.
Figure 6-12 Alarm Configuration Interface