Flash Modes; Power Save Feature - Olympus FE-100/X-710 Owner's Manual

1
Press flash mode button (
Flash setting screen is displayed.
2
Press [\ to select the flash mode, and press i.
You can also set by pressing
3
Press the shutter button halfway.
In conditions where the flash will fire, # lights (flash stand-
by).
4
Press the shutter button completely to take the picture.
En
Flash working range:
W (max.): Approx. 0.2 m to 3.8 m (0.7 ft. to 12.5 ft.)
T (max.) : Approx. 0.5 m to 2.2 m (1.6 ft. to 7.2 ft.)
Icon
No Auto flash
indication
Red-eye
!
reduction flash
#
Fill-in flash
$
Flash off

Power Save Feature

To save battery power, the camera automatically enters to the sleep mode and
stops operating if not used for 30 seconds. The monitor switches off automatically.
Press the shutter button, l or k to turn the monitor on. You can select the
length of time after which the camera automatically enters to the sleep mode.
If the camera is not operated for 30 minutes after the camera enters sleep mode,
it automatically retracts the lens and turns off. To resume operation, turn on the
power again.
14

Flash Modes

).
Flash Mode
The flash fires automatically in low light or backlight
conditions.
The red-eye reduction flash mode significantly reduces this
phenomenon by emitting pre-flashes before firing the
regular flash.
The flash fires regardless of the available light.
The flash does not fire even in low light conditions.
repeatedly.
Description