Roller Latch Assembly (Independent Doors); Door Removal; High Limit Thermostat - Vulcan-Hart VC5GD Service Manual

FULL SIZE GAS CONVECTION OVEN - REMOVAL AND REPLACEMENT OF PARTS
ROLLER LATCH ASSEMBLY
(INDEPENDENT DOORS)
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove screws that attach roller latch assembly
to door.
Fig. 30
2. Reverse procedure to install.

DOOR REMOVAL

1. Open door to a 90° angle.
2. Lift door up off hinges to remove.
Fig. 31
F45598 (0616)
Disconnect the
Page 14 of 35
3. Reverse procedure to install the replacement
door.
4. Check oven for proper operation.

HIGH LIMIT THERMOSTAT

electrical power to the machine and
follow lockout / tagout procedures.
1. Remove racks.
2. Remove high limit thermostat cover/mounting
plate from inside oven cavity at the top.
Fig. 32
3. Disconnect lead wires from high limit thermostat.
NOTE: Remove old RTV sealer from cover and
mating surfaces inside oven cavity and apply new high
temperature RTV sealer before installing.
4. Reverse procedure to install.
Disconnect the