Table of Contents
Advertisement
*
When you have entered a title In a CD, it ap-
pears In the sub display. If you have not en-
tered a title, "NO-TITLE" appears In the title
display Instead. For Information on how to en-
ter a title, refer to the subsection "Entering
titles" In the "Other Handy Functions"
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored In memory. Select the one you prefer.
*
The factory default setting IS "OFF"
Each time you press Z-EHCR button
[ID,
the tone
effect changes In the following order'
"Z-ENHANCER 1" ... "Z-ENHANCER 2" ... "Z-
ENHANCER
3"'"
"OFF"'" "Z-ENHANCER
1"...
• Z-ENHANCER 1 bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• OFF
no sound effect
Adjusting the tone
Press A-M button
[1]]
and select the item to adjust.
Each time you press A-M button
[1]],
the item
changes In the following order:
• When Z-enhancer 1, 2 or 3
IS
set
"Z-EHCR" ... "BAL" ... "FAD" ... Function
mode ...
Adjusting the bass
1 Press A-M button
[1]]
and select "BASS"
2. Turning the Rotary knob
[lID
clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
*
The factory default setting IS "0" (Adjustment
range: -6 to +6)
3. When the adjustment IS complete, press A-M
button
[1]]
several times until the function mode
IS reached.
Adjusting the treble
1 Press A-M button
[1]]
and select "TREB"
2. Turning the Rotary knob
[lID
clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
*
The factory default setting IS "0" (Adjustment
range: -6 to +6)
3. When the adjustment IS complete, press A-M
button
[1]]
several times until the function mode
IS reached.
Basic Operations
Adjusting the balance
1 Press A-M button
[1]]
and select "BAL"
2. Turning the Rotary knob
[lID
clockwise empha-
sizes the sound from the nght speaker; turn-
Ing it counterclockwise emphasizes the sound
from the left speaker.
*
The factory default setting IS "0" (Adjustment
range: L13 to R13)
3. When the adjustment IS complete, press A-M
button
[1]]
several times until the function mode
IS reached.
Adjusting the fader
1 Press A-M button
[1]]
and select "FAD"
2. Turning the Rotary knob
[lID
clockwise empha-
sizes the sound from the front speakers; turn-
Ing it counterclockwise emphasizes the sound
from the rear speakers.
*
The factory default setting IS "0" (Adjustment
range: F12 to R12)
3. When the adjustment IS complete, press A-M
button
[1]]
several times until the function mode
IS reached.
Adjusting the Z-enhancer
Press Z-EHCR button
[ID
and select the Z-
enhancer mode (1 to 3) to adjust.
2. Press A-M button
[1]]
and select "Z-EHCR"
3. Turning the Rotary knob
[lID
clockwise adjusts
In
the
+
direction; turning it counterclockwise
adjusts
In
the - direction.
*
When Z-enhancer 1 IS selected, you can adjust
the bass In the range of ±2.
*
When Z-enhancer 2 IS selected, you can adjust
the treble In the range of ±2.
:1:
When Z-enhancer 3 IS selected, you can adjust
the bass and treble In the range of ±2.
4. When the adjustment IS complete, press A-M
button
[1]]
several times until the function mode
IS reached.
11
Advertisement
Table of Contents
