HTC touch cruise User Manual page 147

To connect to a wireless network
After Wi-Fi is turned on, your device scans for available wireless networks in your
area.
1.
The network names of the detected wireless
networks are displayed on a pop-up message
window. Tap the desired wireless network,
then tap OK.
Note
When you select an open (unsecured)
network, you will be automatically
connected to the network after tapping OK.
You do not need to do steps  and .
2.
On the next pop-up message window, do one
of the following:
• Tap The Internet if the wireless network
connects your device to the Internet.
• Tap Work if the wireless network connects
your device to a private network.
3. Enter the key and then tap Connect.
Next time you use your device to detect wireless
networks, you will not see the pop-up message
windows again, and you will not be prompted to
enter the network key of the previously accessed
wireless network (unless you perform a hard reset
which will erase custom settings on your device).
Note
Wi-Fi networks are self-discoverable, which means no additional steps are required for
your device to connect to a Wi-Fi network. It may be necessary to provide a username
and password for certain closed wireless networks.
Internet 147