3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
●
The camera releases the shutter
automatically.
To combine only two pictures, press the
A button before taking a third frame.
4 Repeat Step 3 to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.
If the shutter does not automatically release,
try [MANUAL] or [PC].
Taking pictures with [MANUAL]
1 Use HI to specify at which edge the
next picture is to be connected.
Direction for
combining the
next frame
26 EN
CANCEL
MENU
SAVE
1
1
BACK
MENU
2 Press the shutter button to take the fi rst
frame.
AUTO
AUTO
1
1
BACK
MENU
1st frame
3 Compose the next shot so that joint area
OK
1 overlaps joint area 2.
4 Press the shutter button to take the next
shot.
To combine only two pictures, press the
A button before taking the third frame.
5 Repeat steps 3 and 4 to take a third
frame.
●
After the third frame is taken, the camera
MANUAL
MANUAL
automatically processes the frames and the
combined panorama image is displayed.
2
2
To exit the panorama function without
saving an image, press the m button.
Joint areas
MANUAL
MANUAL
2
2
1
1
CANCEL
MENU
1
1
CANCEL
SAVE
MENU
Composition of the 2nd frame
MANUAL
MANUAL
2
2
SAVE
OK
MANUAL
MANUAL
2
2
OK