Setting An Index Mark A - Olympus LS-20M Detailed Instructions

Setting an index mark A

Setting an index mark
If an index mark is placed, you can quickly find a
location you want to listen to in fast forward and
fast rewind and when cuing a file. Index marks
can be added only during PCM recording with
this recorder or to PCM files recorded using this
recorder.
• To add index marks, the index
function must be registered to the Fn
button (☞ P.76).
3
1 Press the Fn button at the position you
want to add an index mark.
• A number appears on the sub LCD and an
index mark will be placed.
• Even after an index mark is placed, recording
or playback will continue so you can place
index marks in other locations in a similar
manner.
Clearing an index mark
1 Play the file containing the index mark
you wish to erase.
EN
52
Press the 9 or 0 button to
2
select the index mark to erase during
playback.
3 While the index number is displayed
for approximately 2 seconds on the
sub LCD, press the ERASE button.
• The index mark is erased.
• Index numbers after the erased index
number will be automatically decreased by 1.
Notes
• During recording or playback, the main LCD is
off.
• Up to 16 index marks can be set in a file. If you
try to place more than 16 index marks, the
[Index Full] message will appear for index
marks.
• Index marks cannot be set or erased in a locked
file (☞ P.76).
• An index mark cannot be added to a movie file
shot with the recorder or a file in MP3 format.
• Index marks cannot be erased during repeat
playback (☞ P.57).
Pressing the ERASE button during repeat
playback will make the recorder enter into
trimming mode (☞ P.63).