Recommended Settings By Recording Condition - Olympus LS-20M Detailed Instructions

Recommended settings by recording condition

The recorder is initially set to [PCM 44.1kHz] mode so that you can make high quality stereo recordings
immediately after purchasing it. The various functions relating to recording can be configured in detail to suit
the recording conditions. The following table shows the recommended settings for some example recording
conditions. Configure the functions to suit the actual recording conditions.
Recording
Indoor musical
settings
performance
Recording
When the [Rec Level] is set to [Manual] you can adjust the recording level.
level*
Adjust while looking at the level meter.
( ☞ P.68)
[Mic Sense]
( ☞ P.67)
[Low Cut Filter]
( ☞ P.68)
[Rec Mode]
The recording level can be adjusted to suit the volume of the original sound
( ☞ P.67)
You can configure whether to adjust the recording level automatically or to adjust it manu-
[Rec Level]*
ally.
( ☞ P.68)
When [Rec Level] is set to [Manual] you can configure the limiter function.
[Rec Monitor]
Select whether or not to output the recording monitor sound from the EAR jack.
( ☞ P.69)
[Plug-inPower] Select whether or not to use the plug-in power function according to the external
( ☞ P.69)
microphone connected to the MIC jack.
* When [Rec Level] is set to [Auto] the recording level will be adjusted automatically. When this happens, the
recording level adjustment function and limiter function will not work (☞ P.68).
Recording condition
Band
Performance in a
performance in a
vast hall, etc.
practice studio
[Low]
[Off] or [100Hz]
Recording A
Conferences with
Conferences with
large crowds in
a few people
vast meeting
indoors
venues
[High]
[300Hz]
2
EN
39