Olympus LS-20M Detailed Instructions page 16

Linear pcm recorder
Hide thumbs Also See for LS-20M:
Table of Contents

Advertisement

4 Icon display:
1
1
2
3
4
5 678 90!@ #
1 Shooting mode (s) ( n )
2 Recording Level ( i )
3 Zoom ( h )/ Volume ( g )
4 Microphone Sensitivity ( q )( r )
5 Low Cut Filter (c)
6 Limiter ( [ )
7 Voice Sync ( Z )
8 Equalizer ( ] ) ( ^ ) ( _ ) ( ' )
9 Playback Mode ( Y ) ( X ) ( W )
0 Self timer ( j )( k )
! White balance ( { )( ; )( < )( : )( = )( | )
@ Metering ( u )( v )
# Exposure compensation ( y )
$ Image stabilization ( I )
% Reverse Angle Recording ( o )
EN
16
About the two LCD displays
%
The recorder has two displays, the main LCD and
the sub LCD, utilized differently depending on
mode and function.
During recording or playback:
During recording or playback:
• • During recording or playback, the
During recording or playback, the
$
main LCD is off and only the sub LCD is
main LCD is off and only the sub LCD is
on.
on.
When operation is stopped:
When operation is stopped:
• • When operation is stopped, both the
When operation is stopped, both the
main LCD and sub LCD are on.
main LCD and sub LCD are on.
Menu settings:
• • When you switch to the menu
When you switch to the menu
settings, both the main LCD and sub
settings, both the main LCD and sub
LCD are on.
LCD are on.
During shooting or playback:
During shooting or playback:
• • During shooting or playback, both
During shooting or playback, both
the main LCD and sub LCD are on.
the main LCD and sub LCD are on.
However, when the [Main LCD
However, when the [
Display
Display] setting of [
Settings
Settings] is set to [
are off during shooting.
are off during shooting. (☞ P.71).
When operation is stopped:
When operation is stopped:
• • When operation is stopped, both the
When operation is stopped, both the
main LCD and sub LCD are on.
main LCD and sub LCD are on.
Menu settings:
• • When you switch to the menu
When you switch to the menu
settings, both the main LCD and sub
settings, both the main LCD and sub
LCD are on.
LCD are on.
Identification of parts
A mode
n mode
Main LCD
] setting of [Recording
Recording
] is set to [Off
Off], both the LCDs
], both the LCDs

Advertisement

Table of Contents
loading

Table of Contents